Menu Contact

Subscribe to our Newsletter

You have 0 items in your Cart.

How To Install

HOW TO INSTALL

Picture
1. Remove original drain plug and drain oil.

THIS IS THE LAST TIME YOU'LL EVER GET THIS DIRTY!
SAY GOODBYE TO YOUR OIL DRAIN PLUG!

Picture
2. Hand install the valve until tight, and give 1/8 turn with a small crescent wrench on the body.

DO NOT OVER-TIGHTEN!
*Please refer to the RECOMMENDED TORQUE chart below.

3. Close the lever and refill with engine oil.

When it's time for an oil change, just:

Picture
1. Lift up the lever and turn counter-clockwise.
2. Turn back the lever to close.
3. Make sure the lever is secured in the locked position

TORQUE RECOMMENDATION

Picture