Kemsol MOSS KILL 5L Lichen & Algae Remover

Algae Mould Moss & Lichen Control

Description

Easy to use and effective agent that controls moss, mould, mildew, lichen and algae growing on most exterior hard surfaces. Popular ‘wet and walk’ type product
Supplier Code: FK-MOSKI05
 

Directions

Initial Application: Use at a ratio of 1:4 (20% solution, 200ml per litre) with cold potable water.

Subsequent Applications: Use at a ratio of 1:20 (5% solution, 50ml per litre). 

Spray onto surfaces, and leave.
 

For best results allow a dry contact time of at least 3 hours. Most surfaces do not require rinsing although some aged painted surfaces may require a rinse to avoid streaking.
 

Best applied first thing in the morning or last thing at night onto a cool surface to minimise evaporation with no rain expected for 12 hours.
 

Good Practice

Under Good Practice Protocol based on accepted international research a 1% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces with a minimum contact time of 10 minutes. At this concentration the product provides 1000PPM QAC.